
LiGHT26
Six installations show our new LED modules at work. Walk the booth, open each product and leave your details to receive the datasheets first.
Walk the booth
Select an installation on the render or on the plan to see the product and how it is shown.


Booth design Revision A, 4 × 3 m. B is on the outside of the left wall.
Six installations, five products
Each letter on the booth is one installation. Open it to see what is shown and jump to the product page.
On show at booth 50
One page for each product, with optics, configurations and a form to receive the datasheet first.
Optic flex 15 × 16 mm, 2D and 3D bendingAt the booth: A, CView product →
LINEARlight FLEX® Lens Maxi
Large lens optic flex, white and RGBWAt the booth: DView product →
LINEARlight RIGID® Optic Finesse
Rigid linear with individual lens opticsAt the booth: FView product →
Tec FLEX® Diffuse RGBW Addressable
Addressable RGBW dotless flexAt the booth: EView product →
BackLED RGBW
Addressable RGBW backlightingAt the booth: BView product →
Inside every reel
Two technologies shown on the back wall, built into our LED modules.
Safe Dimming Technology
SDT
Smooth dimming. Consistent light.
Precise dimming down to 0.1%, with stable light output and LED performance preserved over time through reduced electrical stress.
Phosphors on silicone
OptoGen
The right colour. Reel after reel.
Binning isn't left to chance: LED by LED phosphor calibration gives consistent colour points and uniform light output across every reel.
Meet us in London
LiGHT26 brings together architects, lighting designers and industry professionals. Come and see the products at work.
When
Wednesday 18 November, 10:00 to 21:00.
Thursday 19 November, 10:00 to 17:00.
Where
Business Design Centre, 52 Upper Street, Islington, London N1 0QH. Inventronics booth 50.
Angel Underground station is 4 minutes away on foot. Kings Cross and St Pancras International are one stop away.
Book a meeting
Reserve time with our architectural team at the booth.
DMX
Addressable
Colour for light boxes, module by module.
A chain of 20 IP68 modules for backlighting, each one addressable via DMX512. Separate red, green, blue and white LEDs for clean colours and consistent white, and a 160° lens that fills large boxes evenly.
Built for backlighting
Twenty modules on flexible cables, designed to light large surfaces in colour and in white.
DMX512, module by module
Each module has its own address: scenes, gradients and animations across the whole box surface.
True RGBW
Single monochrome red, green and blue LEDs plus a dedicated 6500 K white, 3 SDCM, for clean colours and brilliant pastels.
160° batwing lens
Spreads the light wide and low, for even backlighting with fewer modules and shallower boxes.
Potted, IP68
Robust encapsulation and adhesive tape on the back. Cut and run every single module.
| Channel | Wavelength / CCT | Flux | Power |
|---|---|---|---|
| Red | 620 to 630 nm | 32 lm | 0.73 W |
| Green | 520 to 535 nm | 88 lm | 0.73 W |
| Blue | 465 to 475 nm | 21 lm | 0.73 W |
| White | 6500 K, CRI > 80 | 113 lm | 0.73 W |
| Voltage | 24 V DC (23 to 25 V), SELV |
|---|---|
| Chain | 20 modules, 6.07 m, pitch 290 mm |
| Module | 93 × 32 × 11.4 mm, 8 LEDs |
| Flux per module | 254 lm full RGBW |
| Power per module | 2.9 W full RGBW |
| Efficacy | 87.6 lm/W (white 156 lm/W) |
| Dimming | 1 to 100%, PWM or DMX |
| Lifetime | 50,000 h (L70B50 at Tc 75 °C) |
| Ambient temperature | −25 to +60 °C |
| Protection | IP68, for enclosed boxes outdoors |
| Approvals | CE, ENEC, UL, BIS |
How many modules?
Choose the box depth and the diffuser to see the suggested module pitch for a 1 × 1 m box, then play a scene.
- Module pitch
- Modules per m²
- Chains per m² (20 modules)
- Power per m², full RGBW
Suggestions from the datasheet layout guideline, for high luminance in a 1 × 1 m box. Results depend on the box surfaces, size and diffuser: use a matt white reflective interior, connect the modules in parallel and test the layout in your project. Our team can help with the final layout.
One chain, two ways to control it
Same modules, same light. Choose whole chain control or single module addressing.
DMX
- ControlDMX512, every module
- Wires5 × AWG20, A → DMX+, B → DMX−
- Chain20 modules, 58 W, 5080 lm full RGBW
- Per channel14.5 W · R 640 · G 1760 · B 420 · W 2260 lm
4CH
- Control4 channels, current regulated modules
- DimmersOTi DALI DIM 1-4CH D, OT Wi DIM 5CH CA, OT DMX DIM 5CH
- Chain20 modules, 58 W, 5080 lm full RGBW
- Per channel14.5 W · R 640 · G 1760 · B 420 · W 2260 lm
White 6500 K as standard. 4000 K, 3000 K, 2700 K and amber on request (made to order, MOQ applies).
Surfaces that change colour
From a single sign to a whole ceiling.

Light boxes and signage
Medium and large boxes and channel letters, in colour or white, also outdoors in sealed enclosures.

Luminous ceilings
Large backlit areas and ceilings that change colour through the day.

Shops and restaurants
Dynamic mood lighting behind panels, counters and walls.

Trade fairs and events
Backlit graphics and panels with scenes driven by DMX, like on our LiGHT26 booth.
Ready to drive
Power and control from the Inventronics range.
Get the BackLED RGBW datasheet first
Leave your details and we send it as soon as it is released.

Honeycomb
A diffuse flexible line with glare control built in: a honeycomb grid on the top bending version, side fins on the side bending version. Low UGR light for spaces where people look up... offices, retail, hospitality and galleries.
Diffuse light, with manners
LINEARlight FLEX® Diffuse keeps its soft, continuous line. The honeycomb and the side fins add what close viewing spaces need: no glare.
Glare cut at the source
The honeycomb grid and the side fins block the direct view of the bright surface from low angles.
Soft, directed light
The structure narrows the beam and sends light where it is needed, for even, comfortable lighting on desks, shelves and walls.
Clean aesthetics
A black body that disappears into dark ceilings, with a precise, technical look when lit.
Flexible and modular
Top bending or side bending, easy to cut and connect, rolls up to 12 m with consistent light, 24 V or 48 V.

| Versions | Top bending with honeycomb · Side bending with fins |
|---|---|
| Glare | Low UGR |
| Voltage | 24 V · 48 V |
| Section | 14 × 11 mm |
| Lengths | Rolls up to 12 m, cutting pitch 50 mm |
| Protection | IP66 · IP67 |
| Body | Black |
Two ways to stop glare
Choose the bending direction of the line, and the glare control comes with it.
Honeycomb
The line bends over curved surfaces, up and down. A honeycomb grid sits on the light output and cuts glare in every direction.
- Bends over vaults, steps and 3D surfaces
- Glare control in all directions
- Precise, technical look when lit
Side fins
The line draws curves on flat ceilings and walls. Fins along both long sides shield the light from side views, where glare comes from in corridors and open spaces.
- Draws free curves in the plane
- Fins follow the curve along the long side
- Glare control across the line
See the light, not the source
The honeycomb grid and the side fins keep the bright source out of sight, for comfortable light where people look up.
Unified Glare Rating
UGR measures how much glare people perceive in a space. The lower the value, the more comfortable the light, especially in offices and spaces where people look up.
very comfortable16 to 19
comfortable19 to 22
noticeable> 22
uncomfortable
Where people look up
Diffuse Honeycomb is made for close viewing spaces, where comfort matters as much as light.

Offices and workspaces
Low UGR light above desks and meeting tables, in curves that soften the ceiling.

Hospitality ceilings
Free lines on dark ceilings and canopies, comfortable to look at from lounges and terraces.

Retail
Directed light on shelves and displays, with no glare for customers.

Galleries and museums
Soft, controlled light for visitors who look up and around, with the line kept discreet.
Ready to install
The honeycomb line works with the LINEARlight FLEX® family of accessories and Inventronics drivers.
Get the Diffuse Honeycomb datasheet first
Leave your details and we send it as soon as it is released.

Lens Nano
A 15 × 16 mm flexible module with recessed single lens optics. It follows curved walls and fluid facades in 2D and 3D... and keeps the beam clean and continuous along every bend.
Optics that follow the curve
Most optical linear systems are rigid, and most flexible ones only diffuse. Lens Nano brings real beam control to a line you can bend.
Single lens optics
Each LED has its own lens, recessed below the top surface. A clean beam with no stray light, and less glare from close viewing angles.
Bends in 2D and 3D
Runs along curved walls and fluid facades without interruption, keeping the 31 mm LED pitch, even across joints. Bending radius 100 mm along the module, 200 mm sideways.
Built for outdoor
IP67 with drainage that keeps water off the lenses, for facades, landscape and coastal sites. Works from −30 to +50 °C.
Made in Italy
Designed and produced in Treviso, with full control of the supply chain and reliable lead times.

| Section | 15 × 16 mm |
|---|---|
| LED pitch | 31 mm, 32 LEDs/m |
| Flux | Up to 2000 lm/m |
| Efficacy | 135 lm/W |
| Light colour | 2700 · 3000 · 4000 K, others on request |
| Colour rendering | CRI 80+ · CRI 90+, 3 SDCM |
| Voltage | 24 V |
| Lengths | 1 · 3 · 5 m, cutting pitch 250 mm |
| Protection | IP67, non walkable |
| Finishes | White · Black |
Clean beams, on any curve
Three optics, from grazing to washing. Select one to read where it works best.
Beam illustrations, not photos. Lab beam tests and photometric files will follow
Grazing on textured walls and stone from a line set close to the surface. The tightest beam in the range, for the cleanest blade of light.
- Best for
- Grazing
Graze or wash, up or down
The line can sit at the foot of a wall or along the ceiling edge. Pick the effect to see where it goes and which optic to start from.
| Wall height | Optic | Setback |
|---|
Where straight lines stop
Lens Nano is designed for the curves of contemporary architecture, indoors and outdoors.

Curved facades
Follows fluid facades where rigid linear products cannot, keeping one continuous line of light with no visible breaks.

Soft interior walls
Runs along curved walls at the floor or the ceiling, grazing or washing them from top to bottom or bottom to top.

Curved walls from a cove
Hidden in a ceiling cove, the line follows the curve of the wall and grazes it from top to bottom, bringing out the texture.

Landscape walls
IP67 and drainage for gardens: hidden at the foot of curved stone walls, the line grazes them from below.
More than a strip
Lens Nano is one part of a complete system, designed to work together from the drawing to the installation.
Get the Lens Nano datasheet first
Leave your details and we send it as soon as it is released.

Lens Maxi
A 45 × 25 mm flexible module with large single lens optics. Up to 3500 lm/m in white and 1500 lm/m in RGBW, in runs up to 2 m that bend in 3D... for tall facades, long throws and dynamic scenes.
Big light, still flexible
Lens Maxi takes the single lens concept of Lens Nano to architectural scale: more flux, longer throws and colour, on a line that still follows the curve.
Large single lens optics
Bigger lenses for more beam control and longer throws, to reach the top of tall facades from a line at their base.
Two versions
White up to 3500 lm/m for maximum output, RGBW at 1500 lm/m for colour and dynamic scenes.
Bends in 3D
Follows curved volumes and fluid facades in runs up to 2 m.
Built for outdoor
Designed for facades, bridges and landscape.
| Lens Nano | Lens Maxi | |
|---|---|---|
| Section | 15 × 16 mm | 45 × 25 mm |
| Max flux | 2000 lm/m | 3500 lm/m white, 1500 lm/m RGBW |
| Light colour | White 2700 to 4000 K | White 3000 or 4000 K, RGBW |
| Max length | 5 m | 2 m |
| Bending | 2D, 3D | 3D |
| Voltage | 24 V | 24 V |
| Best for | Interiors, low walls, details | Tall facades, long throws, dynamic scenes |
White power or full colour
Same body, same lenses, two light engines.
White
1500, 2500 or 3500 lm/m for grazing tall facades and long throws. CRI 80+ or 90+, 3000 or 4000 K.
RGBW
Full colour plus a dedicated white channel at 3000 or 4000 K, CRI 80+. Four channel control, or addressable DMX for scenes along the line.
Beams for architectural scale
Five optics, with larger lenses for more reach. The beams below are illustrations.
Beam illustrations, not photos.
The narrowest beam of the range: with large lenses and high flux it reaches the top of tall facades from a line at their base.
- Best for
- Grazing tall facades
Graze, wash or flood
More flux means taller walls and longer distances. Pick the effect to see where the line sits.
| Wall height | Optic | Setback |
|---|
Where scale matters
Lens Maxi is designed for large surfaces and long distances, in white or in colour.

Tall facades and towers
A line at the base that reaches the top: high flux and narrow optics for tall facades.

Bridges and infrastructure
RGBW for structures that change colour for events, with a body built for outdoor exposure.

Large curved volumes
3D bending at architectural scale: stadiums, pavilions and fluid roofs.

Landmarks and events
Everyday white and event colour from the same installation.
Built as a system
Lens Maxi installs with dedicated fixing clips. The rest of the system is in development.
Get the Lens Maxi datasheet first
Leave your details and we send it as soon as it is released.

Optic Finesse
Designed to control what is lit... and what the eye is allowed to see. Individual optics shape a continuous line of light into precise grazing, washing and accent beams.
From linear lens to optical engine
Same family, same footprint. What changes is how every single LED is shaped into light.
Individual lenses
Each LED gets its own TIR lens instead of one linear lens. Cleaner beams, less spill, fewer secondary images.
Better performance
More light on the target surface and higher efficiency.
Wide range of optics
Narrow, medium, wide and elliptical distributions, plus glare control inserts on the same platform.
Minimal, unchanged
The slim body and its clean lines stay as they are, so it disappears into architecture the same way.
| RIGID Finesse | RIGID Optic Finesse | |
|---|---|---|
| Optics | Linear lens | Individual lens per LED |
| Voltage | 24 V | 24 V · 48 V option |
| Light colour | Static white | Static white, RGBW |
| Glare control | Honeycomb | Eye lid, tilted beam, honeycomb |
| Profile | 25 × 33 mm | Same |
Choose the beam, keep the line
Every optic fits the same body. Real lab tests of the prototype, all taken from the same position: select one to read its data.
Real images of the prototype, lab beam test. Same 50 mm setback for all optics
Grazing on stone, brick and textured surfaces. A long, tight beam for tall walls and deep reveals.
- Best for
- Grazing
Graze, wash or flood
Three ways to light a surface, three families of optics. Pick the effect to see where the line sits and which beam to start from.
Grazing
| Wall height | Optic | Setback |
|---|
Light on the wall, not in the eye
Four inserts on one platform. Pick the one that matches the viewing angle of the space.
Standard lens
Maximum output and efficiency. The reference for grazing and washing when the source is out of sight.
Eye lid
A visor over each lens hides the source from low viewing angles, for fixtures that sit in sight lines.
Tilted beam
The beam is tilted inside the optic while the body stays square to the surface. Clean installs close to the wall. 24 × 90° tilted optic, for a height to distance ratio of 3:1.
Honeycomb
A louvre on each lens for the highest visual comfort in hospitality, museums and retail: UGR < 16.
White and colour
Static white
CRI 80 and CRI 90, from warm to cool white, with all 5 white optics. From 2400 to 4000 K, up to 2500 lm/m.
RGBW
Full colour plus a dedicated white channel for facades and scenes, with dedicated 24°, 33° and 50° optics. Up to 2500 lm/m.
Where it belongs
Each architectural element asks for its own beam. Start from the element, then choose the optic.

Facades and cornices
Grazing from the base or the ledge, a narrow 13° beam that reveals stone texture up to the cornice line.

Columns and pilasters
The 13 × 40° elliptical beam follows the shaft and spreads across its width, with no spill on the wall behind.

Window reveals and arches
Short runs tucked into sills and jambs, 34° to outline openings from inside the frame.

Canopies and soffits
Wide 50° washing from a concealed line along the edge, for even light across ceilings and overhangs.
Mounting kits, open to your input
The Finesse kit family carries over. The rest is being shaped now... tell us what your projects need.
Get the Optic Finesse datasheet first
Leave your details and we send it as soon as it is released.
RGBW
Addressable
Every 10 cm, its own colour.
A dotless RGBW line where every 10 cm segment is controlled on its own via DMX. Saturated colours, soft pastels thanks to the white channel, and dynamic effects... in an IP67 body that bends top or side.
Colour without dots
A diffuse line with no visible LEDs, now with control on every 10 cm.
Addressable every 10 cm
Each segment is driven on its own via DMX, through the SM16522PS IC, for chases, gradients and pixel effects.
RGBW, 4 chips in 1
Red, green, blue and a white chip in every LED package. White at 3000 K or 4000 K for pastel tones with good colour rendering.
Dotless, IP67
A continuous diffuse line with end caps as wide as the strip, protected for damp and outdoor environments.
A complete system
Works with Inventronics 24 V constant voltage drivers and DMX controllers, with cables soldered on both ends.
| Voltage | 24 V constant voltage |
|---|---|
| Control | DMX, one segment every 10 cm |
| Flux | Up to 290 lm/m top, 160 lm/m side |
| Power | 18 W/m |
| White channel | 3000 K or 4000 K |
| Lifetime | 50,000 h (L70B50) |
| Protection | IP67 |
| Reel | 5 m, 2 cables soldered on each side |
| Ambient temperature | −20 to +40 °C at full power |
| Approvals | CE, RoHS |
| Channel | Wavelength / CCT | Top | Side |
|---|---|---|---|
| Red | 625 nm | 40 lm/m | 20 lm/m |
| Green | 525 nm | 100 lm/m | 60 lm/m |
| Blue | 465 nm | 20 lm/m | 15 lm/m |
| White | 3000 K | 140 lm/m | 80 lm/m |
| White | 4000 K | 130 lm/m | 80 lm/m |
Play with every segment
A simulation of what addressable control does on a 4.4 m run. Pick an effect, or mix your own colour with the white channel.
Colour wave
Screen simulation, real colours depend on the display.
Top or side
Two bending directions, the same addressable control.

Top
- Section16 × 20 mm
- FluxUp to 290 lm/m
- Efficacy15.5 lm/W
- Min. bending250 mm diameter

Side
- Section11 × 20 mm
- Flux160 lm/m
- Efficacy8.9 lm/W
- Min. bending190 mm diameter
Find your code
Choose version and white channel to get the ordering code and the matching accessories.
| Accessory | Code | EAN |
|---|
Light that moves
For spaces that change mood through the day, and for lines that tell a story.

Mood lighting
Coloured atmospheres for hospitality and retail, from warm pastels to deep colour.

Dynamic effects
Chases, gradients and scenes that move along the line, segment by segment.

Shapes and graphics
Logos, drawings and signs traced in light, like the brain on our LiGHT26 booth.

Outdoor details
IP67 for terraces, landscape and damp areas.
Get the Tec FLEX RGBW datasheet first
Leave your details and we send it as soon as it is released.
